Decorative 3/4" Slat Veneer Tambour Panels for Fluted Wall & Furniture Design

Hover over image to zoom in

Available in Maple Wood Veneer, Red Oak Wood Veneer, and White Oak Wood Veneer.
These decorative tambour panels can be used on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors.
Flexible tambour can bend at slat joints to allow for curved applications with 3” minimum radius.

Available in Maple Wood Veneer, Red Oak Wood Veneer, and White Oak Wood Veneer.
These decorative tambour panels can be used on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors.
Flexible tambour can bend at slat joints to allow for curved applications with 3” minimum radius.
Panel size is true 8 ft. (96 in.) high x 4 ft. wide x 5/32 in. thick.
Can be trimmed with fine tooth saw or cut length-wise with utility knife.
Unfinished wood veneer is ready to stain, paint or clear coat.
Easier to work with than typical wall cladding. To install, simply apply construction adhesive to the flexible paper backer and mount tambour sheet to your surface.
Made in the USA.

This item is IN STOCK

Adhesive Information	Recommended adhesive for wall covering is any high-quality construction mastic in caulking type tubes. See Installation Instructions.
Degree	30 degree groove
Indoor Outdoor Use	Indoor use only
Material	Maple Veneer with MDF Core
Notes	64 Slats Per Panel
Radius Information	2" Minimum Radius
Sheet Size	Nominal 4' x 4' Long (actual 47-3/4" x 48") Sheet
Species	Unfinished Solid Maple
Thickness	5/32"
Type	Canvas Backed
Width	3/4" Wide Slats

Download Installation Instructions