4ft Wide by 8ft High 5/32in Thick Unfinished Domestic Maple Veneer Decorative Wall Tambour Panel with 1/2 in 30 Degree Groove Slats

Hover over image to zoom in

Shown in Red Oak

SKU: V1231-MP

Unfinished Maple wood veneer with MDF core.
Panel size is true 4 ft. wide by 8 ft (96 in.) high x 5/32 in. thick with 1/2in. 30 degree groove slats.
Flexible tambour sheet can bend at slat joints to allow for curved applications with 1” minimum radius.

Unfinished Maple wood veneer with MDF core.
Panel size is true 4 ft. wide by 8 ft (96 in.) high x 5/32 in. thick with 1/2in. 30 degree groove slats.
Flexible tambour sheet can bend at slat joints to allow for curved applications with 1” minimum radius.
Use on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors.
Can be trimmed with fine tooth saw or cut length-wise with utility knife.
Unfinished wood veneer is ready to stain, paint or clear coat.
Easier to work with than typical wall cladding. To install, simply apply construction adhesive to the flexible paper backer and mount tambour sheet to your surface.
Made in the USA.

$119.60

per sheet

Our return policy

1 - 9	10 + Savings: 4%
$119.60	$113.85

This item is IN STOCK

Available Sample:

Random Size Cut Piece

Adhesive Information	Recommended Adhesive For Wall Covering Is Any High-Quality Construction Mastic In Caulking Type Tubes. See Installation Instructions.
Brand	Outwater
Certification	Made In The USA
Degree	30 Degree Groove
Material	Made from American Solid Hardwoods; Wood tambours may be finished using normal wood working techniques. Refer to finishing product for exact specifications and directions.
Notes	96 Slats Per Panel
Radius Information	1" Minimum Radius
Sheet Size	4' x 8' Sheet
Species	Unfinished Solid Maple
Thickness	5/32"
Type	Brown Paper Backer
Width	1/2" Wide Slats

Download Installation Instructions