4ft Wide by 8ft High 5/32in Thick Unfinished Imported Maple Veneer Decorative Wall Tambour Panel with 1in Slats

Hover over image to zoom in

SKU: NEV-431-MP

Unfinished imported Maple wood veneer with MDF core.
Panel size is nominal 4 ft. x 8 ft. high (actual 47-3/4 in x 96 in) x 5/32 in. thick with 1 in. wide 30 degree groove flat slats.
Flexible tambour sheet can bend at slat joints to allow for curved applications with 3” minimum radius.

Unfinished imported Maple wood veneer with MDF core.
Panel size is nominal 4 ft. x 8 ft. high (actual 47-3/4 in x 96 in) x 5/32 in. thick with 1 in. wide 30 degree groove flat slats.
Flexible tambour sheet can bend at slat joints to allow for curved applications with 3” minimum radius.
Use on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors.
Can be trimmed with fine tooth saw or cut length-wise with utility knife.
Unfinished wood veneer is ready to stain, paint or clear coat.
Easier to work with than typical wall cladding. To install, simply apply construction adhesive to the flexible Bamboo Fiber reinforced paper backer and mount tambour sheet to your surface.

$123.95

per piece

Our return policy

1 - 9	10 + Savings: 8%
$123.95	$113.32

This item is IN STOCK

Adhesive Information	Recommended adhesive for wall covering is any high-quality construction mastic in caulking type tubes. See Installation Instructions.
Degree	30 degree grooves
Material	Internationally produced from North American Hardwoods; Wood tambours may be finished using normal wood working techniques. Refer to finishing product for exact specifications and directions.
Notes	64 Slats Per Panel
Radius Information	3" Minimum Radius
Sheet Size	Nominal 4' x 8' Long (actual 47-3/4" x 96") Sheet
Species	Unfinished Solid Maple
Thickness	5/32"
Type	Bamboo Fiber Reinforced Paper Backer
Width	1" Wide Slats

Download Installation Instructions