1' Wide x 8' High x 3/8" Thick Unfinished Imported Solid Maple Tambour Sheet with 1" Half Round Slats

Hover over image to zoom in

Shown in White Oak

SKU: NES-483-1-MP

Made of solid Maple wood, Internatioanlly produced from North American Hardwoods.
1" wide half round pattern slats.
Bamboo Fiber reinforced paper backer.
Flexible tambour sheet can bend at slat joints to al...

Made of solid Maple wood, Internatioanlly produced from North American Hardwoods.
1" wide half round pattern slats.
Bamboo Fiber reinforced paper backer.
Flexible tambour sheet can bend at slat joints to allow for curved applications with 8" minimum radius.
Use on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors.
Panel size: 8 ft. high x 1 ft. wide x 3/8 in. thick.
Can be trimmed with fine tooth saw or cut length-wise with utility knife.
Unfinished wood is ready to stain, paint or clear coat.
Easy to install. Simply apply construction adhesive to the paper backer on the back of tambour sheet and mount it to your surface. Use pin/finishing nails to hold it in place while the glue sets.

$230.00

Step 1 - Select Species

Species: Maple

$230.00

per sheet

Our return policy

1 - 9	10 - 24	25 +
$230.00	$207.00	$189.00

This item is IN STOCK

Adhesive Information	Recommended adhesive for wall covering is any high-quality construction mastic in caulking type tubes. See Installation Instructions.
Material Information	Internationally produced from North American Hardwoods
Notes	12 Slats Per Panel
Paintable/Stainable	Wood tambours may be finished using normal wood working techniques. Refer to finishing product for exact specifications and directions.
Radius Information	8" Minimum Radius
Sheet Size	1' x 8' Long Sheet
Species	Unfinished Solid Maple
Thickness	3/8"
Type	Bamboo Fiber Reinforced Paper Backer
Width	1" Wide Slats

Download Installation Instructions