Angular Groove Solid Wood Tambour Panels with 60 Degree Slat Channels for Architectural Interiors

Hover over image to zoom in

SKU: 373-TMBR-PARENT

Available in Solid Maple, Solid Cherry, and Solid Red Oak.
These decorative wood tambour panels can be used on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors.
Flexible tambour sheet can bend at slat joints to allow for curved applications with 2” minimum radius.

Available in Solid Maple, Solid Cherry, and Solid Red Oak.
These decorative wood tambour panels can be used on walls, ceilings, wainscoting, pole wraps, bar fronts, drawer fronts, and tambour doors.
Flexible tambour sheet can bend at slat joints to allow for curved applications with 2” minimum radius.
Panel size: 95 in. high x 1 ft. wide x 5/16 in. thick.
Can be trimmed with fine tooth saw or cut length-wise with utility knife.
Unfinished wood is ready to stain, paint or clear coat.
Easy to install. Simply apply construction adhesive to the cloth backer on the back of tambour sheet and mount it to your surface. Use pin/finishing nails to hold it in place while the glue sets.
Made in the USA.

$0.00 to $366.00

Our return policy

This item is IN STOCK

Adhesive Information	Recommended adhesive for wall covering is any high-quality construction mastic in caulking type tubes. See Installation Instructions.
Degree	60 Degree Grooves
Indoor Outdoor Use	Indoor use only
Material	Solid Maple
Notes	16 Slats Per Panel
Radius Information	7-1/2" Minimum Radius
Sheet Size	1' x Nominal 32" Long Countertop Height Sheet
Species	Unfinished Solid Maple
Thickness	3/16"
Type	Bamboo Fiber Reinforced Paper Backer
Width	3/4" Wide Slats

Download Installation Instructions